Notify me when the price drops
We will email you if we find a lower price on this product!
This listing is for a Brand New LiteOn power adapter.
This works for many devices, including the Arris S33 Cable Modem
This is a VERY high quality power adapter that is good for a variety of devices (any Amperage draw up to 1.5A). Even if the device is rated for 12V/1A or 12V/1.25A, this power adapter will automatically adjust to meet the amperage draw needed.
lInput:
90-135Vac, 0.5A max, 60Hz +/-5% (57-63Hz). ( US 2 pin-prong)
l12V
+/- 10%, 1.46A, 18W dc output.
lInrush
current : ≤35A at 135Vac at 45℃,
cold
start, a phase angle of 80 degrees.
lInrush
current :The maximum AC inrush current, measured at a phase angle of 80 degrees
and at a cold start ambient temperature of 25oC, shall be limited to 35 Amps or
less than the maximum peak non-repetitive current the rectifier diodes and all
AC components that have this current can handle without damage, whichever is
less. This condition shall be met for 135 volts AC, 50Hz line and for all
temperature conditions defined in this document. The inrush current pulse
duration shall not exceed 6msec.
lHold
up time > 10ms at 90Vac, full load.
lDynamic
load: 12V +/- 10%, 600mVp-p
maximum.
lRipple/Noise:
150mV, with bandwidth 20MHZ, with a 100uF 50V Aluminum
Electrolytic Capacitor and a 10uF ceramic cap in parallel.
lAverage efficiency: >80% at
115Vac/60Hz.
lPower consumption: Pin < 0.5W at
no load and 115Vac/60Hz.
lOVP:
12V output SHALL NOT exceed 18V for any duration.
lSCP/OCP:
auto-recovery.
lLightning surge: 4KV/2ohm Bi-wave,
and ring wave 12Ω.
lESD:
8K/15KV contact and air.
lE-cap life: ≥4 Years (35,040 hours) @
45°C, full Load, 90Vac Input voltage.
lTop: 0
to 45℃.
lTOUCH
TEMPERATURE: The power supply shall not exceed a 35° C temperature rise up to
an ambient temperature of 45° C on any portion of the enclosure surface or AC
input prongs regardless of the airflow conditions at max load.
lDC
cable length is 1500mm, UL2468, 24 AWG with plug 182-2100056-00L spec.
lCase outline dimension: 90*32*50
mm.
lTurn
on delay time: 2 sec.
lAluminum
Electrolytic: Ripple
Current 80%, Max
Voltage (>100V Rated) 80% For the input bulk cap only, use >200V Rated
part
SHIPPING POLICIES:
ABOUT US:
We have been in the cable and broadband business for over 20 years. We buy, repair, and sell quality new and refurbished equipment. We also specialize in the deployment of high-speed internet access in cable TV systems, hotels, and other multi-dwelling properties. We strive to offer value to our customers big and small and to deliver excellent customer service